|
Interface
|
LAN: Ethernet (10Base-T/100Base-TX) x 4 portsVideo output terminal (composite NTSC)SD Card Slot
|
|
Supported Protocols
|
IPv4TCP, UDP, HTTP, FTP, DHCP
|
|
Resolution
|
320 x 240, 640 x 480
|
|
Image Quality
|
3 settings (favor clarity, standard, favor motion)
|
|
Image Encoding System
|
JPEG, MotionJPEG
|
|
Frame Rate
|
Max. 15 frames/sec (320 x 240)
|
|
Security
|
User ID and password required for monitoring
|
|
Power Source
|
AC Adaptor 12V DC
|
|
Supplied Voltage
|
12V
|
|
Camera Connection and Display
|
Up to 8 cameras can be connected and displayedDisplays output in single-screen 8-page mode, or 4-screen, 2-page mode
|
|
Remote Control Operation
|
Yes, all connected cameras can be remote-controlled
|
|
Camera View Modes
|
Sequential switchingSensor-activated switching (BL-C10 and Bl-C30 only)Manual switching
|
|
Network Settings
|
On-screen settingSetting items: IP address, subnet address, gateway, DNS server 1, DNS server 2
|
|
SD Card
|
Yes
|
|
SD Card Functions
|
Still and moving image recording and playbackSetting for sensor-activated and timer recording
|
|
Wireless Technology
|
IEEE802.11g and IEEE802.11b
|
|
Frequency bandwidth
|
2412 to 2484 MHz
|
|
Channel OFDM
|
Yes (Orthogonal Frequency Division Multiplexing system)
|
|
Transmission system
|
IEEE802.11g: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 MbpsIEEE802.11b: 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
|
|
Transmission speed
|
Automatic fallback
|
|
Repeater
|
Yes
|
|
Access Point
|
Yes
|
|
Wireless Security
|
WEP (64/128/152 bits)ESSID ANY access denial (setting required)ESSID non-transmission within beacon (setting required)No-response function for probe request (setting required)
|
