|
Software Download - PalmCam® Camera driver -Models PV-DC2590/PV-DC2090
| Date of Release: 06/01/2000 4:00 AM |
| Version: |
2.0 |
| Operating System: |
Windows 95/98 |
| Models: |
PV-DC2590/PV-DC2090 |
| Instructions: |
- Use WinZip software to open the attached "2090-2590.ZIP" file. This file contains zipped (compressed) files needed for installation. (If you do not have WinZip, you can download a version at www.winzip.com.)
- Go to the directory on your hard drive where you instructed WinZip to unzip this file to, and double click the file named "setup.exe" to begin installation.
- Follow the instructions on the screen to install the files.
| |
|
DOWNLOAD |
|
Software Download - SuperDisk PalmCam® Camera driver-Model PV-SD4090
| Date of Release: 05/01/2000 4:00 AM |
| Version: |
1.0 |
| Operating System: |
Windows 2000 and Windows XP |
| Models: |
PV-SD4090 |
| Instructions: |
- Click the link above to download this file to a directory on your hard drive or on a blank formatted floppy disk. This file contains zipped (compressed) files needed for installation.
- Go to the directory where you saved this file, and double-click on it.
- Unzip (un-compress) the files to a directory on your hard drive or floppy disk.
- Connect your PalmCam SuperDiskâ„¢ Camera to your Windows 2000/XP PC (via the included USB cable).
- Turn the camera ON and Windows 2000/XP will detect that a new USB device has been connected and will ask you for the driver (Usbsdd.inf) location.
- Go to the directory where you unzipped the files, and specify the file named "Usbsdd.inf."
- Windows 2000/XP will then automatically install the driver (Usbsdd.inf) for you.
*** The SuperDiskâ„¢ driver from the camera's box does not need to be installed. | |
|
DOWNLOAD |
|
Software Download - SuperDisk PalmCam® Camera driver-Model PV-SD5000
| Date of Release: 12/01/2000 5:00 AM |
| Version: |
1.0 |
| Operating System: |
Windows 2000 |
| Models: |
PV-SD5000 |
| Instructions: |
- Click the link above to download this file to a directory on your hard drive or on a blank formatted floppy disk. This file contains zipped (compressed) files needed for installation.
- Go to the directory where you saved this file, and double-click on it.
- Unzip (un-compress) the files to a directory on your hard drive or floppy disk.
- Connect your PalmCam SuperDiskâ„¢ Camera to your Windows 2000/XP PC (via the included USB cable).
- Turn the camera ON and Windows 2000/XP will detect that a new USB device has been connected and will ask you for the driver (Usbsdd.inf) location.
- Go to the directory where you unzipped the files, and specify the file named "Usbsdd.inf."
- Windows 2000/XP will then automatically install the driver (Usbsdd.inf) for you.
*** The SuperDiskâ„¢ driver from the camera's box does not need to be installed. | |
|
DOWNLOAD |